Naturebytes

Cam Kit Software Update

Posted by

Software enhancements and bug-fixes available for download.

We’ve released an update for your Wildlife Cam Kit software to close a few bugs we found in the first release (Kickstarter). Below, we explain what you need to do to get these improvements on your cam kit. Check out the change-log at the bottom of the page for the full list of the fixes and improvement.

Additionally, we’ve updated the image file (the operating system that runs your kit) so you can all enjoy using the new PIXEL OS (released by the Raspberry Pi Foundation) when you’re checking your Cam Kit photos on the lovely new desktop.

GPIO pin change

There’s one important change that you’ll need to make if you want to use the new software. We’ve moved the positioning of the jumper cables along a notch to fix an issue where the RTC (Real Time Clock) module can block the adjacent pin.

We’ve taken a page out of the latest instruction manual below to show you the new placement below, or login and take a look here.

It turns out that the manufacturing process of the RTC unit isn’t quite spot on each time and the RTC plastic casing can be offset by a few mm – enough to prevent some users from pushing the jumper cable onto the pin next to it.

Download the image file

Right then. To download the latest image, pop along to our download pages and grab it. If you’re unsure how to load the image file onto your SD card then you can find enlightenment by taking a look at our instruction guide showing how to format and write the new image to your SD card. You’ll need an SD card reader handy although most newish laptops have them built-in.

As always, feel free to contribute via our Naturebytes Github account. We’ve recently had a commit from DeviantSaker who has added the ability to select the location where you photographs save. A great addition we thought. We’ll certainly include it in the new release, or if you want to try it out just grab the python script from GitHub and use it right away.

Enjoy!

Al

Co-founder, Naturebytes

 

Change-log for Software Update:

– Fixed a delay writing to the attached USB flash drive. Images are now written in 1 – 3 seconds (it took up to 60 seconds in some slooow cases).

– Removed the stamping of photographs by default. You can still turn it back on in the code if required.

– Code optimisation (see our GitHub for the very latest improvements)

– Updated the operating system to PIXEL

– Changed the physical GPIO pin to prevent the RTC (Real Time Clock) from blocking the adjacent pin

– Included milliseconds in the filenames to prevent a possible issue where two images are saved within a second (thanks to Richard Keed for suggesting this)

 

Comments

One Response

  1. I like the Naturebytes logo on the photos, in fact, if you have any more I would love to give my cameras a unique image each and a different one for when in IR mode.

Get our newsletter
X
- Enter Your Location -
- or -
MENU